| There are 3 different models within the MD series. The series of dryers start with the MD-1 equipped with drying hoppers with a capacity of up to 3 lb, followed by the MD-2 with a 5 lb hopper capacity and up to the MD-3 with the largest capacity of 15 lb. |
| Dri-Air Industries, Inc is pleased to introduce a new product series in their extensive dryer line for the plastics industry. The MicroDryer Series (MD) is a line of sleek, compressed air dryers designed for very low throughputs. Low dewpoints, -40F and below, are assured as the dryer is equipped with a membrane and compressed air prefilter. The MD-1 was recently unveiled at NPE 2024. Now the complete line of 3 models are in stock and available. Built as a matched dryer/hopper combination, the fully stainless-steel construction is ideal for medical molding with low throughputs and/or high-cost resins. The dryers operate on 120 volt or 230 volt single phase power and a 100 psi clean compressed air supply. For ease of use, the 4” color touch screen will easily guide the operator for temperature and alarm settings and a 7-day timer for automatic start / stops. The full series offer the following options:-40 F dewpoint meterAdjustable fill sensorAvailable Integrated compressed air loader for loading drying hopperFeed throat adapterRemote Dryer capabilitiesTo find out more about the MD Series and how it can help with your drying requirements please email sales@dri-air.com or call (860) 627-5110. |
June 5, 2025
Categories: