Portable Mini Desiccant Dryer
The Mini PD dryers are ideal for small press /extruders with the dryer and hopper on a compact, castered floor frame. Optional DAC compressed air loaders provide easy, safe changeovers liminating press mounted drying hoppers.
System Features:
- Space saving, compact design, only 21 inches (54 cm) high and weighs only 70 lbs (32kg).
- Fast drying with the industry’s smallest two bed dryer.
- Processing rates up to 10 lbs/hr (5 kg/hr).
- ADC based control with high temperature alarm.
- Dimensions 11 x 18 x 21 inches (28 x 46 x 54 cm).
Compact Size:
The Mini PD portable dryer replaces press mounted drying hoppers so material changes can be made off the press/extruder. Dryers can be staged outside the molding area for preparation for the next material run, eliminating downtime on material changeovers.
Conveyance to the press:
Our DAC compressed air loader provides quiet, reliable transfer of dried materials to the press/extruder.
Arid-X 10 Dryer:
The compact dual desiccant bed Arid-X 10 dryer is ideal for low throughput/small press and extruder applications. An all electric design, no compressed air is required, just plug it in to a single phase 110 or 220 volt outlet.
Available Options:
- Water cooled after coolers for high temperature applications (over 250F – 120C)
- Temperature Set Back (available with ADC control option) prevents over drying of materials
| Dri-Air Model | Process Rate | Hopper Capacity | Dimensions | |||
| (lbs/hr) | (kg/hr) | (lbs) | (kg) | [l/w/h] inch | [l/w/h] cm | |
| MPD-5D | 2 | 1 | 5 | 2 | 25x18x26 | 64x46x66 |
| MPD-15D | 5 | 2 | 15 | 7 | 25x18x33 | 64x46x86 |
| MPD-30D | 10 | 5 | 30 | 14 | 25x18x38 | 64x46x96 |
Portable Mini Compressed Air Dryer
The Mini PD dryers are ideal for small press /extruders with the dryer and hopper on a compact, castered floor frame. Optional DAC compressed air loaders provide easy, safe changeovers eliminating press mounted drying hoppers.
System Features:
- Space saving, compact design, only 25 inches(64) L x 18” (46) deep
- Fast drying with Dri-Pak membrane to assure -49F dewpoint air
- Processing rates up to 10 lbs/hr (5 kg/hr).
- ADC based control with high temperature alarm.
Off the press operation:
The Mini PD portable dryer replaces press mounted drying hoppers so material changes can be made off the press/extruder. Dryers can be staged outside the molding area for preparation for the next material run, eliminating downtime on material changeovers.
Conveyance to the press:
Our DAC compressed air loader provides quiet, reliable transfer of dried materials to the press/extruder.
| Dri-Air Model | Process Rate | Hopper Capacity | Dimensions | |||
| (lbs/hr) | (kg/hr) | (lbs) | (kg) | [l/w/h] inch | [l/w/h] cm | |
| MPD-5C | 2 | 1 | 5 | 2 | 25x18x26 | 64x46x66 |
| MPD-15C | 5 | 2 | 15 | 7 | 25x18x33 | 64x46x86 |
| MPD-30C | 10 | 5 | 30 | 14 | 25x18x38 | 64x46x96 |